Underbody protection – Gearbox housing – Steel – Ford Ranger / Raptor – 2019-2022

De Steel bottom plate protection for the gearbox housing of the Ford Ranger / Raptor 2019-2022 is a targeted protection element for one of the most vulnerable components in your pickup's drivetrain. Additionally, thanks to the 3 mm thick steel Excellent impact resistance against stones, curbs, tree roots, and other obstacles you encounter on the road. For intensive off-road or rural use, this is a valuable accessory — especially since damage to the gearbox entails heavy repair costs.

Why protect the gearbox housing separately?

The gearbox is a critical component in the drivetrain of your Ford Ranger or Raptor. Additionally, it is located at a low point under the vehicle, close to the road surface, meaning the housing can quickly come into contact with obstacles on the road or off-road. Damage to the gearbox has serious consequences:

• Oil leakage – the gearbox contains its own oil, which leaks out quickly if damaged
• Shifting problems – damaged sensors or mechanical parts lead to difficult shifting
• Expensive repairs – an overhaul or replacement of the gearbox can cost thousands of euros
• Possible stranding – in the event of serious damage, the drive system may fail completely

A specific underbody plate for this zone is therefore a valuable investment in both your vehicle and your safety on the road.

Vehicle-specific for the Ford Ranger / Raptor (2019-2022)

This base plate is specifically designed for the Ford Ranger and the Ford Ranger Raptor with model year 2019 through 2022 — the facelift generation within the T6 series. As a result, all mounting points align exactly with your vehicle's chassis structure, without the need for modifications to the bodywork.

Do you have a Ford Ranger van 2023 or later? Then check out our specific product page for that generation — the chassis geometry differs and requires a different plate.

Suitable for both Ranger as Raptor

A major plus of this base plate is that it on both the regular Ford Ranger as the Ford Ranger Raptor past within the 2019-2022 model year — based on the same T6.2 platform with the same gearbox geometry. As a result, you cover both vehicle types with a single product.

⚠️ Specifically for the 2.0 diesel engine

This base plate is designed for the 2.0 diesel engine inside the Ranger / Raptor 2019-2022 range. Do you have a different engine variant (such as 2.2d or 3.2d)? Please contact us before purchasing to confirm the correct fit for your specific configuration — mounting points may differ between engine variants.

Compact and manageable: 6,6 kg

Weighing in at just 6,6 kg is this steel plate compact and easy to handle. As a result:

• Adds the minimum weight to your vehicle
• Does it have no measurable effect on fuel consumption?
• Is it easy for one person to lift for installation?
• Ground clearance is maintained to the maximum extent

Why a steel base plate?

A steel base plate distinguishes itself from an aluminium variant in a number of important respects. Moreover, steel offers a higher impact resistance than aluminium — ideal for customers who regularly drive over heavy obstacles or perform work in rugged conditions.

The main advantages of steel:

• Maximum impact resistance – resistant to hard blows from stones and obstacles
• High thickness (3 mm) – sturdy and durable under heavy load
• Deforms upon extreme impact instead of breaking – effectively protects the gearbox, even during heavy contacts
• Cheaper alternative than aluminium with comparable protection

What is this base plate used for?

A base plate for the gearbox housing is particularly valuable in the following situations:

• Off-road adventures – protection during mud baths, sand drifts, and rocky paths
• Construction sites and industrial areas – where raised curbs, rubble, or metal debris lie on the road
• Agriculture and forestry – over rough terrain, tree roots, and stony unpaved roads
• Hunting and outdoor – remote routes where gearbox damage can lead to a breakdown
• Mountainous areas – steep, rough paths with loose stones
• Performance off-road with the Raptor – protection during rapid off-road deployments
• Towing heavy trailers – increased load on the drivetrain requires extra safety

The most important benefits at a glance:

• 3 mm thick steel – maximum impact resistance
• 6,6kg weight – compact and manageable
• Specific fit before and after, Ford Ranger en Ford Ranger Raptor (2019-2022)
• For 2.0 diesel engine – designed specifically for the engine
• Completely custom designed – no modifications to the vehicle needed
• High-quality European production

Quick assembly in 5-15 minutes

A major plus of this base plate is the very fast assembly — only 5 to 15 minutesThis is one of the fastest installation times within our range of base plates, made possible by the compact shape and simple fastening structure. This allows you to install the plate yourself, even with limited technical experience. Prefer not to assemble it yourself? Our installers will be happy to assist you via our installation service.

Important issues

• Engine-specific: designed for 2.0 diesel — if in doubt, check your engine version
• Year of construction specific: Ranger T6.2 generation 2019-2022 (not for 2023+)
• Maintenance: Check the mounting bolts regularly, especially after off-road use.
• Additional base plates: For maximum underside protection, you can combine this plate with other skid plates for the engine compartment, radiator, and drivetrain.

Order directly from 4YourCar

Order your Steel bottom plate protection for the gearbox housing of the Ford Ranger / Raptor 2019-2022 easily online via 4YourCar.nlThe delivery time is typically up to 21 working days plus shipping. Do you have questions about the correct fit for your specific motorcycle model, or would you like more information about additional skid plates? Please feel free to contact us — we are happy to assist you.