Underbody protection – AdBlue Tank – Steel – Toyota ProAce / ProAce Verso 2016-2018

De Steel bottom plate protection for the AdBlue tank Toyota ProAce and ProAce Verso 2016-2018 It protects an often overlooked but essential component for modern Euro 6.1 diesel versions: the AdBlue tank of the SCR system. Thanks to 3 mm thick steel, this skid plate offers high impact resistance against stones, curbs, and obstacles that your commercial van or passenger car encounters daily on urban work sites, construction sites, farmyards, or busy routes. Weighing 11,4 kg and with an installation time of 15-30 minutes, this is a targeted addition to the broader underbody protection of your ProAce.

What is AdBlue and why protect?

AdBlue is an aqueous urea solution that is injected into the exhaust system of modern Euro 6+ diesel engines as part of the SCR (Selective Catalytic Reduction) system. It reduces nitrogen oxide (NOx) emissions to legally permitted levels. Without a functioning AdBlue supply, your vehicle does not meet emission standards — and modern engine management systems will then limit power or eventually prevent the vehicle from starting.

The AdBlue tank is typically located under the vehicle, near the fuel tank. As such, it is exposed to the same risks as the fuel tank — but with different consequences in the event of damage:

• Leaking AdBlue tank – the system detects fluid loss and puts the engine in “limp mode”
• Final refusal to start – modern engine management systems block starting attempts in case of low AdBlue level or leakage detection
• Costly replacement – a new AdBlue tank, including installation and associated piping, easily costs €300 to €800 or more
• Downtime costs – critical for a commercially deployed ProAce
• MOT failure in case of leakage or visible damage to emission components
• Loss of income for self-employed professionals who use their ProAce daily

Important: two different AdBlue versions within the ProAce range

Steeler has two different AdBlue tank plates for the second-generation ProAce, because the emissions system was thoroughly modified in 2018:

This plate (PROACE-R1603S-ADBLUE) — for 2016-2018 Euro 6.1:

• Year of construction 2016 through 2018
• Compatible with both ProAce and ProAce Verso
• For Euro 6.1 diesel versions with AdBlue
• AdBlue tank is located in the early position/version

Other plate (PROACE-R1803S-ADBLUE-E6.2) — for 2018+ Euro 6.2:

• Year of construction from 2018
• ProAce commercial vehicle only — NOT for ProAce Verso
• For Euro 6.2 diesel versions with AdBlue
• The AdBlue tank is located in the revised position/version.

The two plates are not interchangeable — using the wrong version leads to fit problems.

How do you know which version your ProAce has?

The transition from Euro 6.1 to Euro 6.2 took place during 2018. Key features for identification:

Euro 6.1 (this plate applies):

• Year of construction 2016 to sometime in 2018
• Mention "Euro 6" of Euro 6b of Euro 6c on registration certificate (without “.2”)
• First-generation AdBlue version

Euro 6.2 (other plate applies):

• Year of construction 2018 and later
• Mention "Euro 6.2" of “Euro 6d-TEMP” of Euro 6d on vehicle registration certificate
• Second-generation AdBlue version with revised SCR system

Unsure which emission standard your ProAce meets? Send us your registration certificate or the VIN number, and we will check this for you.

Vehicle-specific for the ProAce / ProAce Verso 2016-2018

This base plate is specifically designed for the first phase of the second generation Toyota PROACE — introduced in 2016 on the Stellantis EMP2 platform with the Euro 6.1 emission standard. Unlike the Euro 6.2 version, this plate is compatible with both versions:

• Toyota ProAce 2016-2018 (company car)
• Toyota ProAce Verso 2016-2018 (passenger car with windows, 8-9 seats)

Both share the same AdBlue tank position and mounting in these model years. From 2018 (Euro 6.2), the two versions were split, and a separate plate is required for each version.

Does your ProAce have AdBlue?

For this plate, a working AdBlue system is required in your ProAce. You can recognize this by:

• Create a AdBlue filler cap (often next to or near the fuel filler cap, usually marked in blue)
• Create a AdBlue tank under the vehicle (separate small tank next to the main fuel tank)
• Create a AdBlue level meter in the instrument panel
• Mention "Euro 6" of “AdBlue” in the vehicle registration certificate

Does your 2016-2018 ProAce not have an AdBlue system (certain early versions)? Then this product is not suitable for you — please contact us before purchasing.

Why a steel base plate?

For AdBlue tank protection, steel offers the most robust form of defense:

• Maximum impact resistance – resistant to hard blows from stones and obstacles
• Deforms upon extreme impact instead of breaking – effectively protects the tank
• Long lifespan – resistant to years of intensive commercial use
• Cheaper alternative than aluminium with comparable protection
• Easy to repair – for small dents, repairs are relatively simple

Fully protected: combine with the engine compartment plate

This AdBlue tank plate is intended as addition on the engine compartment protection of your ProAce. We also carry the in our range Steel or Aluminium Underbody Protection for the Engine Compartment of the ProAce 2016+ / ProAce Verso 2016-2024 for the 2.0 BlueHDi version. Together, these plates provide broader protection for the most vulnerable zones under your ProAce.

Custom designed

The plate is shaped to precisely follow the AdBlue tank of the Euro 6.1 ProAce, while maintaining ground clearance. This ensures a tight fit with the chassis structure and prevents interference with AdBlue lines, vents, level sensors, or tank mounting straps.

What is this base plate used for?

The ProAce and ProAce Verso are used for various applications, whicharbwhere AdBlue protection provides added value:

• Courier and parcel deliverers – daily intensive use on mixed surfaces
• Construction companies and contractors – deployment on construction sites, sites with rubble and metal scraps
• Agricultural companies – farmyards, meadows and unpaved roads
• Service vans – installation, maintenance and mechanic companies
• Taxi and shuttle companies – ProAce Verso versions for passenger transport
• Day tour, school, and care bus companies – ProAce Verso for 8-9 passengers
• Mobile workshops – electrical installations, technicians, small trades
• Camper conversions – ProAce camper builds deployed in remote areas
• Vehicle fleet companies – where reliability and downtime limitation are critical
• Shuttle and transport companies in an urban area with many speed bumps and curbs

The benefits at a glance

• 3 mm thick steel – maximum impact resistance
• 11,4 kg – substantial protection capacity
• Fit specific to Toyota ProAce / ProAce Verso 2016-2018 (Euro 6.1)
• Compatible with both commercial vehicles (ProAce) and passenger cars (ProAce Verso)
• Protects the AdBlue tank against under-damage
• Prevents engine management problems caused by a leaking or damaged AdBlue tank
• Limited downtime costs for commercial use
• Assembly time 15-30 minutes
• Custom designed for an exact fit
• No modifications to the vehicle are necessary.
• High-quality European production

Installation

Due to the weight of 11,4 kg and the position of the AdBlue tank — directly under the chassis with various pipes and sensors that must be kept carefully clear — we recommend installation in a professionally equipped workshop. Correct alignment is essential to prevent interference with AdBlue lines, vents, level sensors, and tank mounting straps. The manufacturer specifies a guideline time of 15-30 minutes. Our mechanics will be happy to assist you further via our installation service.

Important issues

• Vehicle: Toyota ProAce and ProAce Verso, model years 2016 through 2018 — with Euro 6.1 diesel engine and AdBlue system
• NOT suitable for Euro 6.2 versions (2018+) – separate plate available in our range
• Are you unsure about your emission standard? Send us your registration certificate or VIN number for verification.
• ProAce without an AdBlue system? Unsuitable
• For Euro 6.2 ProAce (2018+) commercial vehicle – use our separate AdBlue plate (PROACE-R1803S-ADBLUE-E6.2)
• For €6.2 ProAce Verso (2018+) – currently no separate AdBlue plate available; please contact us
• Maintenance: Check the mounting bolts regularly, especially after heavy off-road use.
• Additional protection: Covers only the AdBlue tank area; for the engine compartment, we recommend additional plates.
• Specifications: For exact dimensions, please contact us.

Order directly from 4YourCar

Order your Steel Bottom Plate Protection for the AdBlue Tank of the Toyota ProAce / ProAce Verso 2016-2018 easily online via 4YourCar.nl. Delivery time is usually up to 21 working days plus shipping. Are you unsure about your emission standard (Euro 6.1 or Euro 6.2), or about your version (ProAce or Verso)? Feel free to contact us — we are happy to help.