Underbody protection – AdBlue Tank – Steel – Toyota ProAce 2018+

De Steel bottom plate protection for the AdBlue tank Toyota ProAce from 2018 It protects an often overlooked but essential component for modern Euro 6.2 diesel vans: the AdBlue tank of the SCR system. Thanks to 3 mm thick steel, this skid plate offers high impact resistance against stones, curbs, and obstacles that your commercial van encounters daily on urban work sites, construction sites, farmyards, or intensive courier routes. Weighing 11,40 kg and with an installation time of 15-30 minutes, this is a targeted addition to the broader underbody protection of your ProAce.

What is AdBlue and why protect?

AdBlue is an aqueous urea solution that is injected into the exhaust system of modern Euro 6+ diesel engines as part of the SCR (Selective Catalytic Reduction) system. It reduces nitrogen oxide (NOx) emissions to legally permitted levels. Without a functioning AdBlue supply, your vehicle does not meet emission standards — and modern engine management systems will then limit power or eventually prevent the vehicle from starting.

The AdBlue tank is typically located under the vehicle, near the fuel tank. As such, it is exposed to the same risks as the fuel tank — but with different consequences in the event of damage:

• Leaking AdBlue tank – the system detects fluid loss and puts the engine in “limp mode”
• Final refusal to start – modern engine management systems block starting attempts in case of low AdBlue level or leakage detection
• Costly replacement – a new AdBlue tank, including installation and associated piping, easily costs €300 to €800 or more
• Downtime costs – critical for a commercially used company van
• MOT failure in case of leakage or visible damage to emission components
• Loss of income for self-employed professionals who use their ProAce daily

For ProAce owners who use their vehicle commercially and depend on reliability, protecting the AdBlue tank is therefore a logical investment — especially since the AdBlue tank in a work van is frequently exposed to various surfaces.

Important: exclusively for the ProAce commercial vehicle

Before you order this product, it is crucial to check that your vehicle the ProAce commercial vehicle version is. This product is unsuitable in front of:

• Toyota ProAce Verso (passenger car with windows, 8-9 seats) — non-standard AdBlue tank position or mounting
• Toyota Pro Ace City (smaller commercial vehicle on the Citroën Berlingo / Peugeot Partner platform) — entirely different vehicle
• ProAce Electric versions — no internal combustion engine, so no AdBlue system

You can recognize the commercial vehicle version by:

• Solid side walls without rear side windows (only front cabin windows)
• Cargo space behind the driver's cab instead of seats
• Two or three seats in the front, no passenger transport behind

Unsure about your model? Send us your registration certificate or VIN number, and we will check it for you.

Does your ProAce have AdBlue (Euro 6.2 or newer)?

From 2018, the Euro 6.2 emission standard was introduced for the ProAce diesel versions, meaning that most diesel versions use AdBlue from that moment on. You can recognize an AdBlue-equipped ProAce by:

• Create a AdBlue filler cap (often next to or near the fuel filler cap, usually marked in blue)
• Create a AdBlue tank under the vehicle (separate small tank next to the main fuel tank)
• Create a AdBlue level meter in the instrument panel
• Mention "Euro 6.2" of “AdBlue” in the vehicle registration certificate

Does your ProAce not have an AdBlue system (older Euro 5 versions or certain market versions)? Then this product is not suitable for you — please contact us before purchasing.

Vehicle-specific for the second generation ProAce from 2018

This base plate is specifically designed for the Toyota ProAce commercial vehicle from model year 2018 — the versions with the Euro 6.2 emission standard and associated AdBlue system. The plate fits the ProAce built on the Stellantis EMP2 platform (introduced in 2016, with Euro 6.2 from 2018), which shares its bodywork and technology with the Citroën Jumpy, Peugeot Expert, and Opel Vivaro (from 2019).

Bent steel: fit and stiffness

The 3 mm thick steel is shaped to exactly follow the contours of the ProAce's AdBlue tank. This ensures a tight fit to the chassis structure and prevents interference with AdBlue lines, vents, level sensors, or tank mounting straps.

Why a steel base plate?

For AdBlue tank protection, steel offers the most robust form of defense:

• Maximum impact resistance – resistant to hard blows from stones and obstacles
• Deforms upon extreme impact instead of breaking – effectively protects the tank
• Long lifespan – resistant to years of intensive commercial use
• Cheaper alternative than aluminium with comparable protection
• Easy to repair – for small dents, repairs are relatively simple

Fully protected: combine with the engine compartment plate

This AdBlue tank plate is intended as addition on the engine compartment protection of your ProAce. We also carry the in our range Steel or Aluminium Underbody Protection for the Engine Compartment of the ProAce 2016+/Verso 2016-2024 for the 2.0 BlueHDi version. Together, these plates provide broader protection for the most vulnerable zones under your commercial van.

What is this base plate used for?

The ProAce is a versatile commercial vehicle, whicharbwhere AdBlue protection provides added value:

• Courier and parcel deliverers – daily intensive use over mixed surfaces, curbs, and parking lots
• Construction companies and contractors – deployment on construction sites, sites with rubble and metal scraps
• Agricultural companies – farmyards, meadows and unpaved roads
• Service vans – installation, maintenance and mechanic companies
• Mobile workshops – electrical installations, technicians, small trades
• Camper conversions – ProAce camper builds deployed in remote areas
• Vehicle fleet companies – where reliability and downtime limitation are critical
• Shuttle and transport companies in an urban area with many speed bumps and curbs
• Parcel and urban logistics – where daily urban routes present upright obstacles

The benefits at a glance

• 3 mm thick steel – maximum impact resistance
• 11,40 kg – substantial protection capacity
• Fit specific to Toyota ProAce from 2018 (Euro 6.2)
• Exclusively for ProAce commercial vehicle — NOT for ProAce Verso
• Protects the AdBlue tank against under-damage
• Prevents engine management problems caused by a leaking or damaged AdBlue tank
• Limited downtime costs for commercial use
• Assembly time 15-30 minutes
• Custom designed for an exact fit
• No modifications to the vehicle are necessary.
• High-quality European production

Installation

Due to the weight of 11,40 kg and the position of the AdBlue tank — directly under the chassis with various pipes and sensors that must be kept carefully clear — we recommend installation in a professionally equipped workshop. Correct alignment is essential to prevent interference with AdBlue lines, vents, level sensors, and tank mounting straps. The manufacturer specifies a guideline time of 15-30 minutes. Our mechanics will be happy to assist you further via our installation service.

Important issues

• Vehicle: Toyota ProAce commercial vehicle, year of manufacture 2018 to present — with Euro 6.2 diesel engine and AdBlue system
• NOT suitable for Toyota ProAce Verso (passenger car version) — different AdBlue tank position
• NOT suitable for Toyota Pro Ace City (smaller commercial vehicle on a different platform)
• NOT suitable for ProAce Electric (no combustion engine, no AdBlue)
• ProAce without an AdBlue system? Not suitable — contact us before purchasing
• ProAce of 2016-2017? Not suitable — these do not have AdBlue/Euro 6.2
• Maintenance: Check the mounting bolts regularly, especially after heavy off-road use.
• Additional protection: covers only the AdBlue tank area; for the engine compartment we recommend additional plates (steel or aluminium available in our range)
• Specifications: For exact dimensions or motor compatibility, please contact us.

Order directly from 4YourCar

Order your Steel Bottom Plate Protection for the AdBlue Tank of the Toyota Order the ProAce 2018+ easily online via 4YourCar.nl. Delivery time is usually up to 21 working days plus shipping. Are you unsure about your version (commercial vehicle or Verso) or your emission standard (Euro 5 or Euro 6.2)? Feel free to contact us — we are happy to help.